Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Marietta?
Chimney liner and rebuild work in Marietta typically runs between $2,800 and $7,500 for most residential jobs in 2026. A straightforward stainless steel liner replacement (without masonry rebuild) usually lands between $2,800 and $4,200, while a full chimney rebuild from the roofline up starts around $6,000 and can reach $14,000 or more depending on how much brick needs to come down. The exact number depends on liner material, chimney height, access difficulty, and whether your existing masonry is salvageable.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what we’re seeing across Marietta homes this year, from ranch houses in East Cobb to two-story colonials near the Square:
| Job Component | Typical Marietta Range | Notes |
|---|---|---|
| Stainless steel liner (standard 6″ round, including install) | $2,500 – $4,200 | Most common fix for cracked clay tile liners. DuraFlex or Olympia Chimney material. |
| Clay tile liner replacement (per tile section) | $95 – $180 per tile | Rarely done as standalone; usually part of a larger rebuild. |
| Chimney crown rebuild (concrete cap at top) | $650 – $1,400 | Includes removing old crown, forming new one with proper overhang and drip edge. |
| Partial chimney rebuild (top 3-5 feet above roofline) | $1,800 – $4,000 | Typical for spalling brick along the upper courses. |
| Full chimney rebuild (entire stack from roofline up) | $6,000 – $12,000 | Includes new flashing, crown, and sometimes a new flue liner. Scaffolding adds cost on steep Marietta lots. |
| Full teardown and rebuild from fireplace up | $10,000 – $18,000+ | Needed for severe lean, structural cracking, or chimney fire damage. |
| Chimney flashing replacement (aluminum or copper) | $350 – $900 | Often included with a rebuild but priced separately if done alone. |
| Waterproofing treatment after rebuild | $300 – $600 | Breathable siloxane-based sealant, not paint. Extends masonry life in Georgia humidity. |
These numbers reflect what we’ve quoted on homes from Kennesaw Mountain foothills down to the Chattahoochee corridor. Crawlspace-adjacent chimneys on hillside lots sometimes run 10-15% higher because staging and ladder access get more complicated. If your home sits on a steep grade off Burnt Hickory Road or near Mount Paran, expect the scaffolding portion of any rebuild bid to reflect that.
What Affects Chimney Liner & Rebuild Pricing in Marietta
Not every chimney quote should look the same, and the differences usually trace back to a few things you can see with your own eyes before anyone climbs a ladder.
- Chimney height and roof pitch. A one-story ranch off Canton Road is easier and cheaper to access than a three-story home on a hill in West Cobb where the roofline sits 35 feet up and the pitch exceeds 8/12. Taller means more staging, more safety equipment, more labor hours.
- Existing masonry condition. Marietta’s freeze-thaw cycles, while milder than up north, still do real damage. Brick that’s absorbed decades of Georgia rain and humidity spalls at the surface. If the mason finds soft joints, cracked brick, or a leaning stack, the rebuild scope expands quickly.
- Liner material and size. Stainless steel (316L alloy) costs more than aluminum but lasts decades longer and resists the acidic condensate produced by gas furnaces and water heaters venting through the same flue. If your chimney vents a high-efficiency gas appliance, you may need a flexible liner sized specifically for that draft requirement, which changes the material spec and price.
- Fireplace type and fuel source. Open wood-burning fireplaces have different liner requirements than gas inserts or wood stoves. A wood stove installation or conversion often requires an insulated liner system, which adds $500 to $900 to the liner portion of the job.
- Permit and inspection requirements. Marietta and unincorporated Cobb County both require permits for structural chimney rebuilds. The permit itself is modest (typically $75-$150), but the inspection schedule can influence how the rebuild is phased, which affects labor cost.
- Chimney fire or weather damage history. If a chimney fire has glazed the inside of the flue tiles or a falling limb has knocked brick loose, we’re often dealing with hidden damage that only shows up once the old liner is out. Our written price covers what we can see and test; we don’t surprise you with add-ons after the fact.
How to Save on Chimney Liner & Rebuild
Chimney work doesn’t have to be a mystery, and you don’t have to overpay to get it right. Here’s what actually moves the number:
- Fix the liner before the masonry fails. A cracked flue liner left unattended lets heat and moisture reach the surrounding brick. That’s how a $3,000 liner job becomes a $9,000 rebuild. Regular home chimney inspections catch this early.
- Combine work if you can. If you’re already getting a new liner, the marginal cost of crown repair or flashing replacement while we’re up there is lower than scheduling those separately. We’ll tell you plainly if doing both at once saves you real money.
- Ask for the written price before work starts. No legitimate chimney company should hesitate to put a number in writing. At Ashby Chimney Marietta, every job gets a written quote at the door, and the invoice matches it. That’s the Kingswell Way: say the price, show up in the window, leave it cleaner, put the guarantee in writing, come back if it fails.
- Get the free estimate. We don’t charge to look at your chimney and tell you what it needs. Call (478) 796-8742 and we’ll schedule a time that works for you, with a real arrival window.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner replacement cost in Marietta?
A stainless steel flue liner (the clay or steel tube that vents combustion gases out of your home) replacement in Marietta typically costs between $2,500 and $4,200 including labor and materials. If your existing clay liner is cracked or deteriorated, this is the most common fix we recommend. Call (478) 796-8742 for a free estimate on your specific chimney.
Is it cheaper to repair or rebuild a chimney?
Repairing is always cheaper than rebuilding, but only when the structure is sound. A partial rebuild of the top courses costs $1,800 to $4,000, while a full rebuild from the roofline up runs $6,000 to $12,000. If only the liner is damaged and the brick is intact, a $2,800-$4,200 liner replacement is the better path. We’ll show you what’s actually wrong before you spend a dollar.
How long does a chimney liner last in Georgia?
A properly installed stainless steel liner lasts 20 to 30 years or more in Marietta’s climate, though gas appliance exhaust can shorten that if the liner isn’t the right grade for acidic condensate. Clay tile liners typically last 50 years or more but crack when exposed to chimney fire heat or settling. The 365-Day Done Right Promise from Ashby means if our repair fails within the guarantee period, we return and correct it at no charge.
Can you fix a chimney liner the same day?
In many cases, yes. A standard stainless steel liner installation on a single-story Marietta home often takes one visit of 3 to 5 hours. A full rebuild takes 2 to 4 days depending on weather and scope. Call us at (478) 796-8742 and we’ll give you an honest timeframe for your specific situation. Live answers, 24/7, from a real person.
Does homeowners insurance cover chimney repair?
Homeowners insurance generally covers chimney damage caused by a covered peril like a lightning strike, falling tree, or fire, with typical payouts ranging from the cost of partial repair up to a full rebuild of $10,000 or more. Wear-and-tear, water damage from neglected flashing, and cracked liners from age are usually not covered. We’ve worked with hundreds of Marietta homeowners navigating insurance claims and can document the damage clearly for your adjuster.
Why Marietta Homeowners Work With Ashby Chimney Marietta
We’ve been in this trade since 2002, and we’ve seen what happens when chimney work gets treated as a side gig. Nathan Corliss started Ashby with a simple rule: put the price in writing before the first brick comes down, and stand behind the work after the last one goes back up. That’s what the Kingswell Guarantee means in practice. A written guarantee on every repair. A free second visit if the repair fails. Materials from chimney-trade suppliers like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, not whatever was cheapest at the supply counter.
Ashby carries ash right in the name, fitting for the people whose job is to clean it out. But the bigger job is making sure your flue vents safely and your masonry holds up to Georgia weather. We answer the phone 24/7. We show up at the time we said we would, in a uniform you can verify and a background check behind the name on the badge. And when the work is done, you get it in writing. No caveats, no fine print, no “that was the old price.”
If you’re looking for Chimney Liner & Rebuild in Marietta work done right, we’d welcome the chance to give you a real number. Free estimate, written price, no pressure. Call (478) 796-8742 and talk to a person today.
Pricing reflects the Marietta market as of 2026. Ashby Chimney Marietta offers free estimates – call (478) 796-8742.
Written by Nathan Corliss, Owner at Ashby Chimney Marietta, serving Marietta and surrounding Cobb County communities since 2002.
What Our Customers Say
"Smoke kept rolling back into the living room every time we lit a fire. Turned out the cap was half blocked with a bird's nest. He cleared it and explained why it was happening. Fire draws perfectly now."
- Megan Alvarez"First time owning a house with a fireplace and I had no clue. The guy was patient, walked me through what's safe and what isn't, and didn't make me feel dumb. Priced it before he started."
- Yolanda Reese"The amount of creosote they pulled out was scary. He said we were overdue and explained the fire risk without being dramatic about it. Clean, careful, left the hearth spotless."
- Caroline Webb