HeatShield Chimney Sweep Nationwide

HeatShield Chimney Sweep in Marietta: What to Know First

HeatShield chimney sweep in Marietta runs $189 to $389 for most homes, depending on flue condition and what we’re cleaning off the walls. We’re an independent HeatShield service provider, not a manufacturer-authorized shop, which means we tell you straight when a HeatShield liner needs cleaning and when it needs a repair the warranty might not cover. If you own a HeatShield system and it hasn’t been swept in a year or two, call (478) 796-8742 and we’ll put a written price in front of you before a brush ever goes up the flue.

Call (478) 796-8742

This page is for Marietta homeowners who have a HeatShield liner or coating, or who bought a house with one and aren’t sure what that means for maintenance. We’ll walk through what fails, what it costs, and why our crew treats a HeatShield job a little differently than a plain masonry flue.

How HeatShield Products Fail, and How We Fix Them

HeatShield makes ceramic refractory coating systems and stainless liners, and in Marietta’s humid summers and cool winters those systems develop patterns we see again and again. Here’s what actually shows up on the job:

• CeCure and Cerfractory flaking at the throat. The HeatShield CeCure and Cerfractory coating systems bond to the existing clay tile, and the first place they let go is usually the smoke chamber throat where hot exhaust hits cooler air. We see dime-sized spalling. The fix is a full chimney sweep with a rotary head to remove loose material, then a camera inspection to map exactly where the coating has thinned so you know whether it’s a cleanup or a recoat decision.
• Hs2 stainless liner joints coming loose after hard creosote ignition. HeatShield’s Hs2 rigid stainless liner is good metal, but nobody’s liner is immune to a chimney fire. When a prior owner burned unseasoned pine near Kennesaw, or ran a wood stove hot, we sometimes find the Hs2’s mechanical joints have shifted and allowed a gap. A sweep finds the gap; the repair is reseating and rebanding the joint, which matters because an open seam is a bypass for carbon monoxide.
• Glazed creosote over HeatShield’s textured surface. HeatShield’s coated flue has a slightly textured finish, and that texture hangs onto creosote differently than a smooth clay tile. When we sweep a HeatShield liner in Marietta we often pull what looks like black sugar. That’s stage-two creosote. It needs the rotary head with nylon whips, and if it’s stage-three glazing we’re upfront that a chemical treatment like Cre-Away or Poultice Creosote Remover is part of the price rather than a surprise add-on.
• Water intrusion at the crown where HeatShield meets the masonry. HeatShield’s warranty coverage assumes a sound chimney crown, and a cracked crown in a Marietta freeze-thaw cycle lets water run between the coating and the old tile behind it. That water freezes and pops the coating. We flag this on every HeatShield sweep because if you don’t fix the crown, you’ll sweep the liner every year while it slowly degrades anyway.
• CeCure applied over an unlined smoke chamber. HeatShield CeCure is sometimes specified for smoke chamber parging, and if the original parge coat underneath was never removed, the new coat has nothing to bite. We find this on homes built in the ’60s around East Cobb and Smyrna. The remedy is not something a sweep alone solves, but our camera report tells you plainly whether the chamber needs stripping and redoing, and we’ll do that work with a written price so you’re not guessing.

Our HeatShield Chimney Sweep Process

Every HeatShield job follows the same order. You’ll know what we’re doing, why we’re doing it, and what it’s going to cost before the dust flies.

1. 1
   You call, and a person answers. That’s not a gimmick. We staff the phone at all hours. We’ll ask what you’re burning, when the chimney was last swept, and whether any Masonry or HeatShield paperwork came with the house.
2. 2
   We book a real arrival window. We show up in that window, background-checked and in uniform. Nathan Corliss runs the crew, and on a HeatShield job we always send someone who has worked on coated liners before, because a rookie with a steel brush can scar the surface.
3. 3
   Written quote before any tool leaves the van. We look at the flue, run the camera if it’s been a while, and put the number on paper. That number is what the invoice says. No swap, no ‘while we’re in there’ inflation.
4. 4
   We sweep using the right head for the liner. On HeatShield coatings we run nylon whips in a rotary setup, not a steel cable head. On Hs2 stainless we use a poly brush. Creosote, soot, and nests come out and the flue gets a visual check top to bottom.
5. 5
   Camera inspection with a photo report you keep. This is the part where we show our work. You see the flue before and after. If the HeatShield coating is cracked or delaminated, the photos show it, and we talk about whether that’s a sweep-alone job or a repair we should price.
6. 6
   Cleanup and the Kingswell Guarantee. We leave the hearth cleaner than we found it and hand you the written guarantee on the work. If a covered repair fails inside the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing every time.

What HeatShield Chimney Sweep Costs in Marietta

Most HeatShield chimney sweeps in Marietta land between $189 and $389. A straightforward open fireplace with a coated flue and normal creosote is on the lower end. Add a wood stove insert, heavy glazing, or a chimney that hasn’t been touched since the Clinton years and the price climbs toward the upper end. Here’s the honest breakdown:

• HeatShield open fireplace sweep, standard creosote: $189 to $249
• HeatShield with wood stove insert or heavy stage-two buildup: $279 to $339
• Glazed creosote requiring chemical treatment: add $60 to $110
• Camera inspection with photo report: included with the sweep on every HeatShield job
• Minor HeatShield patch work (small spalled areas in the throat): priced by the job after we see the camera footage

What moves the price is what’s actually in your flue, and nobody knows that until a camera goes up. We’ll tell you the price first, show you the work, put it in writing. Call (478) 796-8742 for a free estimate on HeatShield chimney sweep in Marietta.

Why Marietta Homeowners Call Ashby Chimney Marietta for HeatShield Work

Ashby carries ash right in the name, which is fitting for the people whose job is to clean it out. We’ve been doing this since 2002, and we work under the Kingswell Guarantee: say the price, show up in the window, leave it cleaner, put the guarantee in writing, come back if it fails. That’s the standard, whether we’re sweeping a HeatShield-coated flue in East Cobb, chasing creosote in a Smyrna rancher, or inspecting an Hs2 liner in a Marietta split-level near the Square.

We know HeatShield systems because we see them every week, and because we also work with DuraFlex and Gelco when the flue calls for a different material. That means we’re not married to one brand when a repair needs a smart material choice. Nathan’s crew has covered homes all over metro Atlanta, including plenty near Kennesaw Mountain, and the older flues out there teach you to be honest about what a sweep can and cannot fix. We’re independently owned and operated under the Kingswell Guarantee, not a corporate chain and not an unaccountable one-man van. You get a real person on the phone, a real price on paper, and a real guarantee on the work.

FAQs