Famco Chimney Inspection Nationwide

Famco Chimney Inspection in Marietta: What to Know First

We inspect Famco chimney components in Marietta homes every week, and most inspections run $189 to $379 depending on what level you need and whether we’re pulling out the camera. A standard Level 1 visual inspection on a Famco damper or chimney cap setup takes about an hour, while a Level 2 with full camera work runs longer and costs more. You’ll get a written price before we touch anything, and the report includes photos so you can see exactly what we saw. If you own a home in Marietta with Famco parts and want to know they’re safe before burning season, call (478) 796-8742 and we’ll get you on the schedule.

Call (478) 796-8742

This page is for homeowners who already know Famco is part of their setup, or who found that name on a damper, cap, or stove adapter and want someone who actually works on these parts regularly. We’re an independent Famco service provider, which means we see their products in the field constantly but we don’t answer to the manufacturer. That’s an important distinction when it comes to repair recommendations, because we’ll tell you when a part can be saved and when it genuinely needs replacement.

How Famco Products Fail – and How We Fix Them

Famco makes solid equipment, but every product line has its weak points after enough Georgia summers and winters. Here’s what we actually see in Marietta chimneys:

• Famco top-mount dampers and the rust line. Famco’s locking top dampers do their job, but the cable and hardware sit exposed to everything the Southeast sky throws at them. After seven or eight years in Marietta’s humidity, the cable housing corrodes and the damper either sticks open or won’t seat tight. An inspection catches this early because we can see the seal gap from above before it becomes a draft problem you feel all winter.
• Famco chimney caps with spark arrestor mesh pulling loose. The mesh on Famco caps is fine enough to keep embers in, and that’s also fine enough to clog with creosote when a flue runs cool. We regularly find caps where the mesh has separated from the frame along the bottom edge. That’s not a Famco defect, it’s what happens when a cap catches years of acidic flue gas, but it changes how we approach the inspection because a failing cap changes the whole top-of-chimney picture.
• Famco stove pipe adapters in older Marietta homes. Homes around Cherokee Street and Whitlock Avenue that still have older wood stoves often run Famco adapters and connectors from the stove to the flue. The common failure is at the crimped joint where a short section wasn’t screwed properly, or the gauge is too thin for the burn habits of the homeowner. During inspection we measure for warping and check screw holes, because once a connector warps, it’s done, and no amount of tightening brings it back.
• Famco dampers with stripped handles and missing set screws. A lot of Famco dampers we see in Marietta were installed as a DIY fix, and the installer didn’t understand the set screw placement. The handle strips, the damper plate won’t hold position, and the homeowner thinks the whole unit is junk. Sometimes it is, but often we can get it working correctly with the right hardware, and that’s a much cheaper repair than replacement.
• Famco single-wall to double-wall transitions where the clearance is wrong. In garage conversions and older den fireplaces around east Marietta, we see Famco single-wall stove pipe running too close to framing. An inspection that looks only at the flue interior misses this. We check clearances as part of every Famco inspection because a two-inch mistake here has real consequences, and it’s one of the most common issues we flag for correction.

Our Famco Chimney Inspection Process

This is what a Famco inspection actually looks like when you book with us in Marietta:

1. 1
   Call and book. You reach a live person, tell us what you have, and we schedule a real arrival window. No callback forms.
2. 2
   Arrival and setup. We show up in uniform, walk the chimney from the ground first, then set up drops and ladders if we’re going up. You’ll have a written price before any tool comes out.
3. 3
   Visual inspection. We work top to bottom: cap, crown, flue, damper, firebox, and clearances. On Famco work we pay extra attention to damper seal, cable condition, and any adapter or connector joints.
4. 4
   Camera work (Level 2). If you’ve had a chimney fire, bought the house, or just want certainty, we run the camera through the full length of the flue. You see the footage. We don’t summarize what we saw; we show you.
5. 5
   Parts decision. If a Famco component needs work, we talk through OEM versus a quality aftermarket alternative. OEM is the safe warranty choice; aftermarket sometimes fits better or lasts longer for less money. We give you both prices and let you decide.
6. 6
   Written report and guarantee. You get photos, notes, and a written price for anything we recommend. Any repair we complete carries the Kingswell Guarantee, and if it fails inside the guarantee period, we return at no charge.

What Famco Chimney Inspection Costs in Marietta

Plain numbers, because that’s how Nathan likes it: most Famco chimney inspections in Marietta run between $189 and $379. A basic Level 1 visual inspection with a written report starts around $189. A Level 2 inspection with full camera work, which we recommend for any newly purchased home or any flue that hasn’t been looked at in years, typically lands between $279 and $379 depending on the flue length and access.

What moves the price: a two-story chimney that requires rooftop access, a flue that’s heavily glazed and needs extra camera passes, or a Famco damper where the cable has failed and we need to assess whether the whole unit needs to come out. You’ll know the number before we start, and it’s the number on the invoice when we leave. Call (478) 796-8742 for an exact quote, free.

Why Marietta Homeowners Call Ashby Chimney Marietta for Famco Work

We’ve been doing this since 2002, and the basic promise hasn’t changed: the price you’re quoted is the price you pay. Every Farnco inspection in Marietta gets a written price up front and a written guarantee behind any repair we make. Nathan Corliss grew up in Los Angeles and learned the trade at LA Trade-Tech before joining the chimney industry full time, and nobody on his crew is going to upsell you a liner replacement you don’t need just because the camera is already in the flue.

When we do find something, we fix it with professional-grade materials from recognized chimney-trade brands. On a Famco job, that often means matching the existing part where it makes sense; when a non-Famco part is the better call, we work with DuraFlex liners, HeatShield resurfacing, and Gelco sealants. We’ll tell you the price first, show you the work, and put it in writing, because that’s the whole job.

FAQs